The sensor BAMOX 7200 uses a lead anode to improve the resolution (0.03 ppm in lower range) and a High-Density Polyethylene (HDPE) membrane; signal delivered is 45 mV at 100%.

Comparatively to a PTFE membrane (33 mV at 100%), the HDPE membrane has a quicker answer (approx. half the response time).

The BAMOX 7200 sensor is designed for wastewater applications.

BAMOPHOX 7200 sensor

Range: 0.03...20 ppm
Cathode: Silver
Anode: Lead
Electrolyte: special molarity, reagent grade
Membrane 45 mV: HDPE
Maximal temperature: 50°C
Minimal fluid speed: 0.05 m/s
PG colour: Grey
Cable length: 3 m
Temperature sensor: Pt 100 Ohm / 0°C; 2 wires

Sensor holder

Immersion probe: standard length 1 m; maximal length 3 m
Construction: PVC
Electrical connection: screw connectors
Housing: PBT, IP65