| General Information |
|
| General Catalogue |
|
| At a glance |
 |
|
|
| MUDLine® TGS, Portable sludge level measuring instrument |
General Catalogue 426-01 |
MUDLine® TGS
|
|
MUDLine® TGS, Portable sludge level measuring instrument
- Field portable device
- Sludge level detection, immersion depth up
to 10 m, in primary and secondary clarifier,
thickener, rotten black sludge, sludge level
measuring in small sewage plants
- Adjustable threshold of turbidity detection
- Accumulator battery operated
Range of 100 measurement cycles of 7
minutes each
Automatic switched off after 7 minutes
Charging time of 2 h 30 min as a maximum |
A turbidity sensor (emitter plus receiver) is mounted on an immersion probe
with an integrated hydrostatic level sensor. The light beam is in Infra red range
at 940 nm.
When the immersion probe reaches the sludge surface, the device switches on
an audible alarm and a lightning alarm. At the same time the depth of
immersion is displayed on the main housing.
Accumulator charger supply: 230V AC or 12V CC
Ambient temperature: 0…+50°C
Display: LCD-panel 3-digits, immersion depth [cm]
with measured data storage
with "low battery" signal
1 LED, red: "Sludge level detected"
1 Buzzer: "Sludge level detected"
Measuring accuracy: approximately 1 cm
Immersion probe: PVC / IP68 (10m max.) (EN 60 529)
Cable: special type TPE-cable, 10 m long
Housing and switches: Stand alone with handle
ON-OFF- Lever switch
Sensitivity switch
Sensitivity adjustement potentiometer
IP 44 (EN 60 529)
Dimensions: 300 x 210 x 180 mm
Mass: 3500 g
|
 |
|
Portable sludge level measuring instrument
MUDLine® TGS |
General Catalogue
426-01 |
|
|
|