| General Information |
|
| General Catalogue |
|
| At a glance |
 |
|
|
| 9346, pH - ORP Immersion probe |
General Catalogue 135-01 |
9346
|
|
9346, pH - ORP Immersion probe
- Electrodes holder and protection
- 2 or 3 electrodes, thread PG 13.5
- PVC or PPH construction
- Flange or PE collar fitting
- Wire outlet through a cable gland
- Easy mounting on site |
This immersion probe 9436 is convenient for all pH or ORP measurements in tank, drain, basin, open channel, with or without temperature compensation.
The electrode holder in PVC or PPh is specially designed to avoid electrode damage during calibration and troubles due to humidity.
 |
 |
 |
 |
CODE NUMBERS AND REFERENCES |
 |
 |
 |
 |
Code Reference Designation
135 520 9346/2 PVC PVC 1 m long probe for 2 electrodes (Thread Pg 13,5)
135 530 9346/3 PVC PVC 1 m long probe for 3 electrodes (Thread Pg 13,5)
135 620 9346/2 PPH PPH 1 m long probe for 2 electrodes (Thread Pg 13,5)
135 630 9346/3 PPH PPH 1 m long probe for 2 electrodes (Thread Pg 13,5)
135 112 9358 PE ND65 PE flange, dip length adjustment for 9346
P41 576 Ĝ 75 PE / PVC-C collar
Immersion height: standard length 1000 mm (from 200 to 3000 mm on request)
Construction: PVC or PPH
Mounting: with DN65 PE flange 9358; for dip adjustment
Or PE collar, 75 mm diameter
Maximal pressure PVC and PPH: 4 bar
Maximal temperature PVC: 55 °C
PPH: 100 °C
Maximal pressure and temperature depend of mounted electrodes.
Pressure and temperature values are not for simultaneous conditions.
Associated electrodes for our pH and ORP products are described on the documentation N° 150.
Only electrodes with sealing by Pg 13.5 thread could be mounted on our probes.
Please refer to our documentation 150-02 to choose the convenient model for automatic temperature compensation.
|
 |
|
pH - ORP Immersion probe
9346 |
General Catalogue
135-01 |
|
|
|