Attention! You're watching an archived documentation :
You are in an old document of materiels which not manufactured and not marketed yet
Warning with their use...
M25 & M40
• Water-meter, oscillating disc • Body in nylon • Ranges from 0.5 to 160 l/min • Watertight measuring chamber
These water-meters are suitable for totalization of clean or slightly dirty liquids, raw water or demineralized water.
M25 and M40 are volumetric counters, suitable for totalization of clean or slightly dirty liquids. A gridd located at the inlet, protects the measuring chamber from possible introduction of particles.
Operation: Lower and upper parts of measuring chamber are spherical in shape. Inside the chamber is the disc, which is set in motion by the liquid. The flow causes an oscillating movement of the disc, opening and closing alternately the inlet and outlet orifices of the measurement chamber. The frequency of disc oscillations is magnetically transmitted to the totalizer.
Commissioning The water-meter must be installed on a horizontal pipe, full of liquid.
Displays and remote signals (3 possibilities): • Totalizer: 6 reading rollers • Emitting head (1 or 10 pulses per liter) without display • Emitting head (1 or 10 pulses per liter) without display LCD (Reset function by REED contact - Max. 20 Hz - 24 V - 50 mA)
Accessories : BCP 48: Counter/ downcounter (See data-sheet 289-01)
General Catalog 786-01 13/10/2021 16:29
Water-meter in plastic M 25 – M 40
BAMO Mesures SAS
22, Rue de la Voie des Bans Parc d'activités de la Gare
95100 ARGENTEUIL France