Recherche
MENU Catalog Global Sites
BAMO
INTERNATIONAL
European manufacturer of sensors and instruments for liquids
You are in BAMO EU » Archives » Conductivity » BAMOPHOX 322
General Catalog 322-01
BAMOPHOX 322
BAMOPHOX 322
Resistivity / Conductivity
BAMOPHOX 322
Attention! You're watching an archived documentation :

You are in an old document of materiels which not manufactured and not marketed yet
Warning with their use...

  • μS or MΩ built-in program
  • Programmable scales: 0-200 Ω up to 0-200 MΩ or 0-2 μS up to 0-20 mS or TOR version: 0 - 2 mS up to 0 - 2000 mS
  • Convenient probes, factor 10 - 1 - 0.1 - 0.01 or TOR sensor TCS 100
  • Temperature compensation: Automatic or manual
  • 2 analog outputs 0/4-20mA, galvanic insulated
  • 3 relay outputs (Normally open contact)
  • 1 input to switch the regulation on Stand-by
  • 2 models: Panel mounting 72 x 144 or Wall mounting IP 65

OPTIONS :

  • RS 422 /J-BUS + LOGGER
  • Extension for 2nd measurement input
EXTENSION TERMINAL

An extension terminal (wall or panel mounting):

  • Allows a second measurement parameter (pH, Conductivity, Chlorine, Turbidity, Flow, and 4-20 mA, depending of the model)
  • The data from this blind device are displayed on the main device (second line display). A 4 wires shielded cable is necessary to link both devices (maximum length of 500m)
  • The options RS422 and the data logger are shared between both BAMOPHOX. 
DESCRIPTION

The BAMOPHOX 322 offers high flexibility on use mixing different built-in programmes for regulation, thresholds, temperature compensation, and alarms. The 2 lines back lighted display, 16 alphanumerical characters, gives an easy measurement and temperature reading in any conditions. It also displays the configuration menu and settings of thresholds, analogical outputs, operation data modes, calibration steps.
To allow a quick and easy diagnostic after configuration a simulation program is built-in with direct actuation on contacts outputs, analogical outputs and PID regulation.

A copy of the signal on the 4-20 mA output is galvanic insulated; it can be set up within the all range of the parameter. Temperature measurement is also available on a 4-20 mA output (this output is not available when PID regulation is in use).
Associated probes may have a conductance factor from 0,01 to 10 to get an accurate measurement from 200 Ω up to 200 MΩ or from 2 μS up to 20 mS.

General Catalog 322-01
11/12/2019 15:57
Resistivity / Conductivity
BAMOPHOX 322
Technical & Commercial support's main contacts
Ask a QUOTATION online
BAMO Mesures SAS
22, Rue de la Voie des Bans
Parc d'activités de la Gare
95100 ARGENTEUIL France
Tel : +33 (0)1 30 25 83 32
Fax : +33 (0)1 34 10 16 05
Email : export@bamo.fr
Site : http://www.bamo.eu
Siret : 314 055 864
TVA Intra : FR 08 314 055 864
APE : 2651 B
Capital : 400 000 €
Designed and hosted by CARIMEDIA since 1998
© 1998-2022 All rights reserved - Disclaimer