TCS 3020 is an inductive conductivity probe useful in wastewater treatment and in the chemical industry.
- Monitoring of aeration tower
- Clear water control (wells, drinking water, thermal baths, etc.)
- Control of stormwater and runoff water
- Monitoring of NaCl concentration (0 to 26 %)

TCS 3020 probe is convenient for measuring conductivity on a wide range between 10 μS/cm and 2000 mS/cm.
It uses inductive measurement principle that offers many advantages. There is a total galvanic insulation between measuring loop and the liquid which makes the measurement reliable on many chemicals.

Measurement in immersion
The probe is fixed to end of probe holder for immersion (holder from 500 to 2000 mm with optional flange fitting).

On-line measurement
Probe is mounted on a Te, ND 50 mm (as a minimum).

Complete measuring system includes:

• An inductive probe TCL 3020, cable output.
• A probe holder for immersion or on-line measuring cell.
• A converter (factory calibration)
• A connection cable type C8B
• A monitor BAMOPHAR 364 (data-sheet 364-04)

Associated monitors
BAMOPHAR 364 are designed for inductive conductivity monitoring.
Available ranges:
      0 ...      2 mS/cm
      0 ...    20 mS/cm
      0 ...   200 mS/cm
      0 ... 2000 mS/cm

Temperature compensation is performed by the monitor which provides a 4-20 mA signal output, copy of the measurement.

Factory calibrations are done on each measuring system for a quick and easy start up on site.