Recherche
MENU Catalog Global Sites
BAMO
INTERNATIONAL
European manufacturer of sensors and instruments for liquids
You are in BAMO EU » Archives » Oxygen » BAMOX 7200
General Catalog 460-02
BAMOX 7200
BAMOX 7200
Dissolved oxygen sensor
BAMOX 7200
Attention! You're watching an archived documentation :

You are in an old document of materiels which not manufactured and not marketed yet
Warning with their use...

  • Galvanic dissolved oxygen sensor 
  • Sturdy construction 
  • Easy fitting and maintenance 
  • Range: 0...20 ppm (0-100%) 
  • Large electrolyte volume 
  • Easy membrane replacement 
  • HDPE membrane 
  • Built in temperature sensor: Pt 100 Ohm / 0°C
  • Construction: POM
PRINCIPLE

The sensor BAMOX 7200 uses a lead anode to improve the resolution (0.03 ppm in lower range) and a High-Density Polyethylene (HDPE) membrane; signal delivered is 45 mV at 100%.

Comparatively to a PTFE membrane (33 mV at 100%), the HDPE membrane has a quicker answer (approx. half the response time).

The BAMOX 7200 sensor is designed for wastewater applications.

TECHNICAL FEATURES

BAMOPHOX 7200 sensor

Range: 0.03...20 ppm
Cathode: Silver
Anode: Lead
Electrolyte: special molarity, reagent grade
Membrane 45 mV: HDPE
Maximal temperature: 50°C
Minimal fluid speed: 0.05 m/s
PG colour: Grey
Cable length: 3 m
Temperature sensor: Pt 100 Ohm / 0°C; 2 wires

Sensor holder

Immersion probe: standard length 1 m; maximal length 3 m
Construction: PVC
Electrical connection: screw connectors
Housing: PBT, IP65

General Catalog 460-02
26/03/2022 18:41
Dissolved oxygen sensor
BAMOX 7200
Technical & Commercial support's main contacts
Ask a QUOTATION online
BAMO Mesures SAS
22, Rue de la Voie des Bans
Parc d'activités de la Gare
95100 ARGENTEUIL France
Tel : +33 (0)1 30 25 83 32
Fax : +33 (0)1 34 10 16 05
Email : export@bamo.fr
Site : http://www.bamo.eu
Siret : 314 055 864 000 65
TVA Intra : FR 08 314 055 864
APE : 2651 B
Capital : 400 000 €
Designed and hosted by CARIMEDIA since 1998
© 1998-2022 All rights reserved - Disclaimer