 |
2-way ball valves controlled by an electric actuator allow isolation of a section of a piping system when closed. When open, they provide full bore with no pressure drop. The 90° operating time is fast (approximately 10 seconds). These valves are suitable for applications with aggressive media and are equipped with a manual emergency override and a visual position indicator. The motor must be switched off when using the manual override.
| 2-way ball valve: | ||
| Body | AISI 316 | |
| Seal | PTFE/FPM | |
| Ball | AISI 316 | |
| Ball seat | 15% glass-filled PTFE seats | |
| Fittings | Female threaded BSP (G) | |
| Pressure limits | 63 bar → ND 10 to ND 20 40 bar → ND 25 to ND 50 |
|
| Operating temperature | -10 to +55 °C (valve with actuator) | |
| Electric actuator: | ||
| Movement | 90° | |
| Emergency operating | Manual override | |
| Duty rating | Duty cycle: 30% | |
| Protection | IP 65 | |
| Electrical connections | 1 cable gland ISO M20 1 connector 3 pins + ground, DIN 43650 |
|
| Consumption | 15 W (¼“ to 2”) | |
| Multi-voltage power supplies | 100 ... 240 V AC 50/60 Hz and 100 ... 350 V DC or 24 V AC 50/60 Hz or 24 V DC |
|
| OPTIONS | Back to 0° in case of power failure (safety) 4-20 mA electronic positioning system, 0-20mA or 0-10V |
|
EC Conformity: The instrument meets the legal requirements of the current
European Directives
