The reading is easy on the 4.3" color touch screen for flow-rate or height of liquid, as well as for totalization.
Through a user friendly menu, settings are easy for thresholds, alarms, sampler monitoring and all parameters.

BAMOPHAR 759 converts the input signal directly into flow-rate, through a calculator and using formulas and calibration tables of our Venturi channels (ISO 4359) and our standard V or U channel weirs.

A complete measuring chain consists of the following elements :
- A weir or venturi channel (see our range of open channels)
- A level probe such as BAMOSONIC (Doc 755-03) or BAMOBUL (Doc 759-03) with the associated mounting devices.
- A flow calculator / displayer for open channels, type BAMOPHAR 759
As part of wastewater discharge monitoring, data recording is mandatory.

Extension terminal (panel, wall or DIN rail mounting):

• Allows a second measurement (Turbidity, pH, Conductivity, etc.)
Data from this blind unit are displayed on the main device
• Connected to main unit with a 2x2-wire shielded cable
(Cable length between both devices: max. 500 m)
• Extension terminal uses the RS 422 and data logger of main unit

Panel mounted + extension DIN rail

End-user interface: Color touch screen 4.3'', resolution 480x272 pixels
Display of: measurements, flow rate, temperature, height of liquid, daily volume and totalization, status of relays, settings - Configuration keyword protected

Flow-rate (m³/h) - Resolution 0.1 m³/h - Volumes (m³) - Resolution 1 m³

Memorized flow-rate tables In memory for Venturi channels, weird plates in V or U

Sampler monitoring S2 Set up on volume (m³)

Pulse output S4 For external counter - 1 pulse/m³

Measurement outputs: 0/4-20 mA (max. 600 Ω) 

OPTION (RS 422 + Logger)
Interface RS422 output, J-BUS link - Binary slave mode - 2400 to 9600 bauds; Data Logger Record of cycle average measurement - 150 000 records max. on memory card.